Logo for EZ Klean featuring the subtitle "Rodent Bait Station" and "RBS1" in the top left corner. The clean, modern design highlights the EZ Klean brand’s commitment to effective rodent control.
Logo for EZ Klean featuring the subtitle "Rodent Bait Station" and "RBS1" in the top left corner. The clean, modern design highlights the EZ Klean brand’s commitment to effective rodent control.

Easily Maintain & Service Your Rodent Baiting Program

Designed to fit securely into tight spaces, the EZ Klean® rodent bait station provides reliable rodent management to residential, commercial, and warehouse spaces. Its unique baffling system guides rodents to the bait area of the station, providing a protected place for them to feed. Mount up to four block baits or eight soft baits with the new standard EZ Service Tray fitted with four vertical bait rods. 100% American made.
Buy Product

Features

Black rectangular EZ Klean box with a side entrance and locking lid, shown next to a key; a red line marks the entrance height. A red circle with the number 1 appears in the lower right corner.

Low profile design.

Close-up of an open black EZ Klean plastic container showing interior dividers and vertical pegs, with a red border and a red circle labeled “2” in the bottom right corner.

Comes standard with removable EZ Service Tray to make servicing quick and easy.

Close-up of red plastic cylindrical components with pointed tops inside a black EZ Klean compartment, marked by a red rectangle and labeled with the number 3 in a red circle.

Accommodates four pieces of block bait.

Close-up of an EZ Klean printer ink tank compartment with a red highlighted area showing ink levels and a printed label for ink type and levels.

Allows for eight soft bait placements, with three puncture points to make it harder for rodents to remove bait.

Close-up view of the inside of an EZ Klean machine compartment, showing gears, a chart with instructions, and a section labeled with the number 5 in a red circle.

Accommodates the APNG-621 snap trap.

Close-up of an EZ Klean black plastic container with a small hole highlighted by a red box, shown in step 6 of the assembly process.

Drain holes throughout lid and base keep water draining out of station and away from bait.

Close-up view of a black plastic EZ Klean device interior with a curved section highlighted by a red box, and a red circle with the number 7 in the bottom right corner.

Internal half-moon-shaped walls give high-level durability to the station and keep water out.

Close-up view of the edge of a gray EZ Klean container lid, with a red rectangle highlighting the seam and the number 8 in a red circle at the bottom right.

Raised lip around the front of the station deters unwanted entry.

Close-up of an EZ Klean black case hinge highlighted by a red rectangle, with a red circle labeled "9" in the lower right corner.

Durable hinge design and spring-loaded locking mechanisms provide extended servicing reliability.

Close-up of an EZ Klean black plastic component inside a machine, highlighted by a red rectangle, with a red circled number 10 in the lower right corner.

Durable dual-wall structure gives added strength.

A white label featuring the VM Products logo, barcode, QR code, and EZ Klean serial number 4522963 is affixed to a dark plastic surface. A red circle with the number 11 appears in the bottom right corner.

Barcode attached to lid provides a permanent inspection point, allowing easy scanning, mapping, and logging as part of IPM field solutions.

Close-up of an EZ Klean chart label with checkboxes and a monthly tracking grid inside a black plastic container, marked with a red number 12 in the lower right corner.

Station has built-in slot to hold documentation cards.

Gray EZ Klean plastic component highlighted in a red box beneath a black panel, with a red circle labeled "13" in the bottom right corner.

Uses VM Products Universal Key.

A close-up of a black EZ Klean plastic surface with a raised, abstract shape inside a red box and a red circle labeled 14 in the lower right corner.

Thin plastic allows for easy puncture and installation of ground and surface anchors.

EZ Klean metal bracket and anchoring stake with a locking pin, shown on a white background. A red circle with the number 15 is in the lower right corner.

Adapts to vertical or horizontal positioning and can be secured to the ground or structures using the VM Surface Anchor (SA1), or VM Ground Anchor (GA1), or zip ties.

Dimensions

12.5” x 3.25” x 8.75”

Weight: 1.3448 lbs.

Learn More

Check out
EZ Klean®

Also available in Green and white

USE THE EZ SERVICE TRAY FOR MULTIPLE BAITING SOLUTIONS

Related Blogs